What's in the Box?
The Front Wheel Attachment is easy to assemble and connect to a Walkin’ Wheels Rear wheelchair.
1 set (2) Wheel Struts and Casters
1 set (2) Legs
2 Extenders
1 set Leg Rings
1 Chin Bar
1 Chin Bar Cover
Nuts, Bolts, and Allen Key
(A) Left and Right Extenders (2):
These replace the side extenders that come with the Walkin’ Wheels Rear wheelchair. These are not marked “Left” and “Right” because the only difference between them is that the writing will be upside down if they are installed on the wrong side.
These replace the side extenders that come with the Walkin’ Wheels Rear wheelchair. These are not marked “Left” and “Right” because the only difference between them is that the writing will be upside down if they are installed on the wrong side.
(B) Wheel Struts and Casters (2):
These are marked “L” (left) and “R” (right) and it is very important that they go on the correct side. There is another small “L” or “R” on the bottom of the strut, near where the caster screws in. L and R assume you are standing behind the wheelchair, or that it is the dog’s L and R.
These are marked “L” (left) and “R” (right) and it is very important that they go on the correct side. There is another small “L” or “R” on the bottom of the strut, near where the caster screws in. L and R assume you are standing behind the wheelchair, or that it is the dog’s L and R.
(C) Frame Leg Connectors (2):
“Marked “L” and “R” with stickers (and another mark beneath the stickers if they come off).
“Marked “L” and “R” with stickers (and another mark beneath the stickers if they come off).
IMPORTANT: The LEFT and RIGHT Wheel Struts and Caster (B) must match the LEFT and RIGHT Frame Leg Connector (C). If they are not matched correctly, the wheelchair will be extremely wobbly.
(D) Front Chin Bar (1, 2 pieces):
NOTE: Some extension kits come with a larger chin bar.
NOTE: Some extension kits come with a larger chin bar.
(E) Allen Key/Wrench (2)
(F) Front Bar Screws (2)
(G) Front Bar Comfort Cover (1)
(H) Front Leg Rings (1 Pair)
